Mechanical parts kit for VORON 2.4 3d printer
Included parts:
| Part description | Qty | Notes |
|---|---|---|
| Fasteners | ||
| M5x40 SHCS | 22 | |
| M5x30 BHCS | 22 | |
| M3x30 SHCS | 25 | |
| M5x10 BHCS | 40 | |
| M5x16 BHCS | 27 | |
| M5 Hexnut | 26 | |
| M5 T-nut HNTAJ5-5 | 61 | |
| M3 T-nut HNTAJ5-3 | 120 | |
| M3 Heat-set Threaded Insert (5x3.8mm) | 100 | |
| M3x12 SHCS | 23 | |
| M5 1mm Spacer | 42 | |
| M2x10 Self-tapping Screw | 16 | |
| M3x40 SHCS | 28 | |
| M3 Washer | 2 | |
| M3x20 SHCS | 29 | |
| M3x16 SHCS | 14 | |
| M3x8 SHCS | 217 | |
| M3 Hexnut | 7 | |
| M3 Hammer Head T-nuts | 47 | |
| M4x6 BHCS | 4 | |
| M3x6 BHCS | 6 | |
| Motion | ||
| GT2 20T Pulley (5mm bore, 6mm wide) | 3 | |
| GT2 16T Pulley (5mm bore, 6mm wide) | 4 | |
| GT2 20T Pulley (5mm bore, 9mm wide) | 8 | |
| GT2 80T Pulley (5mm bore, 6mm wide) | 4 | |
| F695 Bearing | 20 | |
| 625 Bearing | 12 | |
| GT2 20T Toothed Idler (5mm ID, 6mm wide) | 2 | |
| GT2 20T Toothed Idler (5mm ID, 9mm wide) | 4 | |
| GT2 Belt Loop (6mm W) - 188mm | 4 | |
| 5x60mm Shaft | 4 | With flats ground |
| 5x30mm Shaft | 1 | Stainless steel shaft for Z-Probe |
| BMG Type Extruder Components Kit | 1 | Clone |
| GT2 Open Belt LL-2GT-9 (9mm wide), 4.5 meters | 1 | 4.5 meters total length |
| GT2 Open Belt LL-2GT-6 (6mm wide), 4.5 meters | 1 | 4.5 meters total length |
| Vibration Management | ||
| Rubber Foot | 4 | |
| Misc | ||
| Fume Extractor Carbon Filter Element | 1 | |
| 4mm Bowden Coupler | 1 | |
| 3M VHB Tape | 1 | 2"x4" sheet |
| 6x3mm Neodimium Magnet | 8 | |
| PTFE Tube (4mm OD 3mm ID) - 1m | 1 | |
This is not a plug-and-pay kind of a kit. It is intended for a very DIY-inclined maker.
At our discretion, we will provide reasonable quantities of extra parts on demand, free of charge, for up to 60 days after the kit purchase. Do not hesitate to contact us if you lost a screw or broke a crimp connector.
We are doing our best to provide all parts in the quantities listed, but mistakes can happen. In case if some items are miscounted, please contact us within 60 days after the purchase and we’ll ship missing items to you free of charge.
Unused and fully intact kit in its original condition can be returned up to 30 days after the purchase.