This is a custom kit. Only parts listed below are included.
|GT2 20T Pulley (5mm bore, 6mm wide)||3|
|GT2 16T Pulley (5mm bore, 6mm wide)||4|
|GT2 20T Pulley (5mm bore, 9mm wide)||4|
|GT2 80T Pulley (5mm bore, 6mm wide)||5|
|GT2 20T Toothed Idler (5mm ID, 6mm wide)||2|
|GT2 20T Toothed Idler (5mm ID, 9mm wide)||4|
|GT2 Belt Loop (6mm W) - 188mm||4|
|5x60mm Shaft||4||With flats ground|
|5x30mm Shaft||1||Stainless steel shaft for Z-Probe|
|GT2 Open Belt LL-2GT-9 (9mm wide), meters||5|
|GT2 Open Belt LL-2GT-6 (6mm wide), meters||5|
|Fume Extractor Carbon Filter Element||1|
|PTFE Tube (4mm OD 3mm ID) - 1m||1|
|ZF Rocker Switch DPST 16A||1|
|IEC320-C14 Power Inlet (not filtered)||1|
|8A Fuse 250V 5x20mm||1|
|#4 x 3/8" Flat Head Self Tapping Screw||2|
|Thermal Fuse Set||1||Includes: 125°C 15A 250V Fuse, ring crimp terminal, connector, screws|
|Insulated QuickConnect Crimp Receptacle||10|
|18AWG Wire set||1||4ft each White/Green/Red; 8ft Black|
|Wago 221-415 5-way Splices||3|
|JST XHP-2 Housing||4|
|JST XHP-3 Housing||4|
|JST XHP-4 Housing||7|
|JST Crimp Pin SXH-001T-P0.6||50|
|MicroFit3 Male Pin||50|
|MicroFit3 Connector Plug 4 Position||5|
|MicroFit3 Connector Plug 3 Position||1|
|MicroFit3 Connector Plug 2 Position||6|
|MicroFit3 Female Pin||50|
|MicroFit3 Connector Receptacle 4 Position||5|
|MicroFit3 Connector Receptacle 3 Position||1|
|MicroFit3 Connector Receptacle 2 Position||6|
|MLX Power Receptacle 3 Position||1|
|MLX Power Plug 3 Position||1|
|MLX Male Pin||6|
|MLX Female Pin||6|
Cable chains are not included in this kit and are available separately.
Power switch and inlet module are compatible with filtered mains option of the printed inlet panel.
This is not a plug-and-pay kind of a kit. It is intended for a very DIY-inclined maker.
At our discretion, we will provide reasonable quantities of extra parts on demand, free of charge, for up to 60 days after the kit purchase. Do not hesitate to contact us if you lost a screw or broke a crimp connector.
We are doing our best to provide all parts in the quantities listed, but mistakes can happen. In case if some items are miscounted, please contact us within 60 days after the purchase and we’ll ship missing items to you free of charge.
Unused and fully intact kit in its original condition can be returned up to 30 days after the purchase.